Access control device for gates, doors, ramps. The device itself has a memory for numbers which, when calling a GSM OC 250-500-1200 device without a call, identifies an incoming call and if the number is programmed into the internal memory opens the gates, ramps, doors. Suitable for buildings as a replacement for existing card systems for opening entrance doors. As for ramps in residential, commercial buildings. Easily change numbers via SMS or Android application.
GSM-OC-250/500/1200
Characteristics
- Power supply 12-24V DC, 2A Max
- Relay on board 10 A, NO contact
- Memory for 250, 500 and 1200 numbers
- Configuration by SMS, password change, service center
- Android application for configuration and management.
Categories: Access Control, GSM
Tags: Access control, GSM
SPECIFICATION
Dimensions: 71,6 mm x 87,5 mm x 59 mm | |
Power supply: 12VDC to 24VDC max 2A | |
Consumption: in stand by mode 2mA | |
Antenna connector: SMA GSM 50ΩΩ | |
Protocols: TCP/UDP/PPP/FTP/HTTP/SMTP/CMUX/SSL | |
IP 40 | |
Temperature: -40 °C ~ +85 °C | |
SIM: Standard 1.8V/3.0V | |
Flash memory on the board | |
Board relay: 1 with NO contacts up to 8A | |
Frequency: 850/900/1800/1900MHzGPRS Multislot ClassClass 12GPRS Mobile StationClass BCompliant to GSM Phase 2/2+Class 4(2W @850/900MHz)Class 1(1W @1800/1900MHz | |
Weight: 140g | |
LED indication: network, status, outputs |